TNPSC CESSE Syllabus 2023 Tamil Nadu PSC Junior Draughting Officer Exam Pattern

TNPSC CESSE Syllabus 2023 is Released Download TNPSC CESSE Detailed Syllabus PDF 2023 TNPSC Junior Draughting Officer Exam Pattern 2023 Download TNPSC CESSE Complete Syllabus 2023 TNPSC Junior Engineer Selection Process 2023 TNPSC CESSE Minimum Qualifying Marks 2023 How to Prepare for TNPSC CESSE 2023

TNPSC CESSE Syllabus 2023

Latest Updated On 15-Feb-2023 : TNPSC has Released Detailed Syllabus for CESSE Examination 2023. Candidates Can Check Complete Syllabus & Latest Exam Pattern From Below;

About TNPSC CESSE Recruitment :

Tamil Nadu Public Service Commission (TNPSC) has Recently Announced and Invited the Online Applications from the Eligible Candidates for the Posts of Combined Engineering Subordinate Services Exam (CESSE). The total number of Vacancies for these Posts were 1083 Posts. Many Interested and Eligible Candidates applied for these Posts online. The Process of Submission of Online Applications for these Posts was commenced from 03.Feb.2023 and Last Date to Apply for these Posts was 04.March.2023. Check the other details from below.

Origination Name	Tamil Nadu Public Service Commission (TNPSC)
Name of Post	Combined Engineering Subordinate Services Exam (CESSE)
No. of Vacancy	1083 Posts
Selection Process	Written Exam
Exam Date	27 May 2023
Online Application Dates	03.February.2023 To 04.March.2023

About NTPSC CESSE Examination :

Tamil Nadu Public Service Commission (TNPSC) will conduct the Written Exam for the Posts of Junior Draughting Officer, Overseer / Junior Draughting Officer, Draughtsman, Grade – III, Foreman, Grade-II on 27th May, 2023…

Nowadays Competition Level become very high so Competitive Exams gets too tougher. Candidates facing critical problem of “What to prepare” and “How to prepare” to give their best in their exams. So, here we are providing the latest Syllabus & Exam Pattern.

Selection Process Of NTPSC CESSC :

NTPSC CESSE (Various Posts) Recruitment will be Done On the Basis of this Following Selection Criteria Below;

• Written Examination.
• Document Verification.

Exam Pattern Of NTPSC CESSE Examination :

Exam Pattern for the Written Exam is as Follows:

• Exam will be of Objective Type.
• Questions will be in the form of Multiple Type Choice Questions.
• Exam will be conducted on OMR Sheets.
• There will be 2 papers in this exam (i.e. Paper 1 & Paper 2)
• Time allocated for Paper 1 & Paper 2 will be 3 hours (Each).
• Maximum Marks for Paper 1 will be 300 hours & for Paper 2 it will be of 150 Marks.
• Paper will be set in English & Tamil Language Only.

Subject	Duration	Maximum Marks	Minimum Qualifying Marks for selection
			SCs, SC(A)s, STs, BC(OBCM)s, MBCs/DCs and BCMs	Others
Paper – I Objective Type (Subject Paper) (200 Questions) Diploma Standard 1. Civil Engineering (Code No. 299) 2. Architectural Assistantship (Code No. 323) 3. Handloom Technology /Textile Technology/Textile Manufacture (Code No. 339)	3 hours	300	135	180
Paper- II (200 Questions) Part-A Tamil Eligibility Test (SSLC Std.) (100 questions/150 marks)	3 hours	Note: – Minimum qualifying marks – 60 marks (40% of 150). – Marks secured in Part-A of Paper-II will not be taken into account for ranking.
Part-B (General Studies) (100 Questions) (Code No.003) General Studies (HSC Standard) – 75 Questions and Aptitude and Mental Ability Test (SSLC Standard) – 25 Questions		150
Total	—	450	—

Detailed Syllabus For TNPSC CESSE Posts :

Exam Syllabus for Examination is given Below :-

TNPSC CESSE Syllabus 2023 for PAPER-I :

CIVIL ENGINEERING (DIPLOMA STANDARD)

Objective Type

SUBJECT CODE: 299

UNIT – I: ENGINEERING MECHANICS

Direct Stresses and strains (Tensile and compressive) due to Axial forces – Deformation of elastic bar due to uni-axial force – Shear force and bending moment diagrams for statically determinate beams – Geometrical properties of sections – Stresses in beams due to bending – Stresses in shafts due to torsion – Pin jointed perfect frames with vertical loads on nodal points (method of joints only).

UNIT – II: MECHANICS OF STRUCTURE

Deflection of cantilever and simply supported beams – Shear force and bending moment diagrams for statically indeterminate structures (Propped cantilever, Fixed Beams, continuous beams, Non- sway Portal frames) using Mohr’s theorems and moment distribution method. Euler’s and Rankin’s formula for columns – Stresses due to eccentric loads – combined stresses due to direct loads and bending moments in rectangular sections.

UNIT – III: CONSTRUCTION MATERIALS & CONSTRUCTION PRACTICE

Bricks, Tiles, Cement, Fine Aggregate, Coarse Aggregate, Timber, Ply wood, Steel, Glass, Plastics, PVC, UPVC, Paints, Mortars, Concrete – Different types, qualities, requirements, standard specifications, Admixtures for cement mortar and concrete. Different types of Foundations, Masonry, Floors, Roofs, Doors and Windows, Weathering Course, Damp proof course, Plastering, Painting, Colour Washing – Specifications for different works.

UNIT – IV: TRANSPORTATION ENGINEERING

Roads – Different types – methods of formation of water bound macadam, bituminous and concrete roads – Hill roads – Requirements – Camber, gradient, super elevation, carriage way, pavements, drainage system, sight distance etc., Traffic Engineering, Bridges – Classification of bridges – Site selection and alignment – Foundation, substructure and super-structure. Sub-grade soil – Soil mass as a three phase system – Grain size classification – Atterberg limits – IS Classification of soils–Compaction – Shear strength – Road Arboriculture – Express Highways – Rapid Transport System.

UNIT – V: HYDRAULICS

Measurement of pressure in liquids – Pressure distribution and total pressure on immersed surfaces – Types of flow (Laminar, turbulent, steady, unsteady, uniform, nonuniform) – Flow through pipes –Losses – Hydraulic gradient and total energy lines. Bernoullis theorem – use of Orifice, Mouthpiece, Orifice meter and Venturimeters – Flow through channels – Bazin’s and manning’s formula – Economical sections for open channels, Pumps – Reciprocating pumps – Centrifugal pumps – Characteristics – Discharge – Power and efficiency, Ground water – Types of well – Test for yield of wells.

UNIT – VI: SURVEYING

Types of Surveys –Chain surveying – Compass surveying – Levelling – Contour surveying – Theodolite surveying – Trignometrical levelling – Tacheometry – Field work – Simple problems. Curves, Global Positioning System (GPS), Remote sensing – Photogrammetric Surveying and Hydrographic Surveying,Total Station and Geographical Information System (GIS).

UNIT – VII: ENVIRONMENTAL ENGINEERING AND POLLUTION CONTROL

Sources of water – Conveyance of water – Treatment of water – Quality of water – Tests on water

–Distribution systems – Sewers – Collection and conveyance of sewage– Sewer Appurtenances – Drainage arrangements and Sanitary fittings in buildings –Treatment and disposal of sewage, Solid waste Management. Environmental pollution – Air – water – Soil – Noise – Pollution Control.

UNIT – VIII: ESTIMATING AND COSTING

Systems of taking out quantities – Trade and Group systems – Material requirement for different items of works – Preparation of data for works – Report writing – Valuation of buildings and properties – Fixation of rents – Approximate estimates – Detailed estimate and Abstract estimate for buildings, well, sump, septic tanks, compound wall, roads etc.

UNIT – IX: STRUCTURAL ENGINEERING

Reinforced cement concrete structure – Analysis and design of singly and Doubly reinforced rectangular and T-beam sections – Cantilever, simply supported, continuous beams – One way  and two way slabs – Lintels and sunshades – Staircases – Rectangular and circular short columns – Isolated column footings. (All designs by Limit State Method only). Steel structures – simple beams

–Tension and compression members – simple columns.

UNIT – X: CONSTRUCTION MANAGEMENT

Planning of a project – Factors to be considered – Project reports – Organization structure on construction departments – Construction planning – CPM and PERT networks – Contracts – Tenders and Tender documents – Bill- Supervision and Quality control – Safety measures in construction sites – Banking practice – Cash flow diagrams. Entrepreneurship, Ethics in Engineering, Use of computers – Information Management, Financial Management, Disaster Management – Types of Natural calamities – Causes for major disaster – Preparedness – Response and Recovery.

ARCHITECTURAL ASSISTANTSHIP (DIPLOMA STANDARD)

SUBJECT CODE: 323

UNIT – I: ENGINEERING MECHANICS

Simple Stresses and Strain – Stress and Strain – Modulus of Elasticity / Elastic constants – Application of stress and strain in engineering field – Behaviour of ductile and brittle material – Loads – Shear Force and Bending Moment – Geometrical properties of sections – Centroid – Moment of Inertia

– Stress in Beams and Shafts – Stresses in Beams due to bending – Stress in shafts due to torsion – Pin Jointed Frames – Analytical Method – Graphical Method.

UNIT – II: BUILDING MATERIALS & CONSTRUCTION

Properties, characteristics, strengths, manufacturing, components & applications of materials & methods of construction & detailing for the following:

Stone – Brick & Clay Products – Lime – Cement – Timber – Concrete – Ferrous and Non-Ferrous Metals – Glass – Plastics – Asphalt, Sealants & Adhesives – Protective and Decorative Coatings – Water Proofing and Damps Proofing Materials – Rural Building Materials(Bamboo, Soil, etc.).

UNIT – III: HISTORY & THEORY OF ARCHITECTURE

History of Architecture

Egyptian Architecture – Greek Architecture – Roman Architecture – Early Christian & Byzantine Architecture – Gothic Architecture – Renaissance Architecture.Indian Architecture – Indus Valley Civilization, Buddhist Architecture, Hindu Architecture – Islamic Architecture in India.Modern Architecture, Post Modernism, Deconstructivism Contemporary World Architecture.

Theory of Architecture

Definition of Architecture – Architecture as satisfying functional, aesthetic & psychological human needs.Elements of Architecture – Form, Space, Light, colour, etc. Principles of Architecture – Proportion, Balance, Scale, Symmetry, etc.

UNIT – IV: STRUCTURAL ENGINEERING

Slope and Deflection of Beams – Propped Cantilevers – Fixed Beams – Arches

– Continuous Beams – Theorem of Three Moments – Continuous Beams – Moment Distribution Method – Columns and Struts – Combined Bending and Direct Stresses– Earth Pressure and Retaining Walls – Working Stress Method Design of Beams for Flexure by L.S.M – Design of T-Beams and Continuous Beams by L.S.M – Design of Beams for Shear by L.S.M – Design of Oneway Slabs by L.S.M – Design of Twoway Slabs by L.S.M – Design of Staircases by

L.S.M – Design of Columns by L.S.M – Design of Column Footings – Design of Simple Beams – Design of Tension Members – Design of Compression Members – Design of Welded Connections.

UNIT – V: ENVIRONMENTAL ENGINEERING

Sources of Water – Collections and Conveyance of Water – Quality of Water – Treatment of Water – Distribution System – Appurtenances and Maintenance of Water Lines – Collections and Conveyance of Sewage – Treatments and Disposal – Environmental Pollution and Control – Industrial Waste Water Treatment and Solid Waste Disposal – Land, Water & Air Pollution.

UNIT – VI: BUILDING SERVICES

Water Supply & Sewage Disposal, Mechanical Systems – Pumps & Motors, Electrical Systems – Generation & Distribution, Ventilation & Lighting, Air Conditioning – Principles, systems & applications, Vertical Transportation systems, Fire Hazards, Safety & Design Regulations, Acoustics.

UNIT – VII: SITE SURVEY & PLANNING

Chain Surveying – Compass Surveying – Plane Table Surveying – Levelling – Theodolite – Contouring – Minor Instruments.

Site Drawings – Site marking, Importance & procedures for making site drawings & dimensioning.

UNIT – VIII: SPECIFICATION & ESTIMATION

Stages of Detailed Estimate – Measurements & Material Requirement – Specification & Report Writing – Approximate Estimates – Areas and Volumes– Data – Valuation – Detailed Estimate.

UNIT – IX: TOWN PLANNING

Town Planning Principles – Road and Street Planning – Housing – Economy, Society, Environment and Transport Policy and Planning – Town Planning Rules, Building Bye-Laws & Development Control Rules.

UNIT – X: COMPUTER AIDED DRAFTING & VISUALIZATION

2D & 3D Drafting & Visualization – Using AutoCAD, etc– Setting limits and creating entities like LINE, ARC, CIRCLE etc – Editing the drawing with edit commands like TRIM, FILLET, COPY, MOVE etc., Creating 2D building working drawings. Visualization using SKETCH UP, 3DMAX, etc.

MECHANICAL ENGINEERING (DIPLOMA STANDARD)

SUBJECT CODE: 255

UNIT I: INDUSTRIAL MANAGEMENT:

X and Y theories of Management, Contributions of Henry Fayol and F.W. Taylor for Management – job evaluation by Ranking method and factor comparison method – motivating techniques – fixing selling price of a product – break even analysis for make or buy decision – sinking fund method and straingt line method of calculating depreciation – ABC analysis – determination of economic order quantity – TQM – ISO standards – certification.

UNIT II: INDUSTRIAL ENGINEERING:

Factors influencing plant location – principles of layout – techniques used to improve layout – primary and secondary causes of an accident – personal protective devices – method study procedure – flow diagram, string diagram and two handed process chart – principles of motion economy-procedure for conducting stopwatch time study, production study and ratio delay study – objectives of preplanning, routing, scheduling, despatching and controlling – difference between inspection and quality control – types of plant maintenance – TPM

UNIT III: PRODUCTION TECHNOLOGY:

Foundry – patterns – special casting techniques – welding – hot and cold working – drawing, rolling and forging – powder metallurgy – plastics – rubber – ceramics – refractories – lathe work – planner – shaper – slotter – drilling machine – milling machines – grinding machines – broaching – boring and jig boring – – Gears manufacturing practice – Heat treatment and metal finishing – press work.

UNIT IV: ELECTRICAL AND ELECTRONICS ENGINEEERING:

Units, Ohm’s law, Kirchoff’s law, Faraday’s law – D.C. Circuits, batteries – electro magnetism – single phase and three phase A.C. circuits – Induction motors – Electronics – diodes – resisitors – capacitors – transistors – logic gates.

UNIT V: MECHANICS OF MATERIALS:

Mechanical properties of metals – simple stresses and strains – modulus of elasticity – geometrical properties of sections – thin cylinders bending moment and shear force – theory of simple bending – torsion and springs – transmission of motion – gear drives and belt drives.

UNIT VI: HEAT POWER ENGINEERING:

Working principle and comparison of otto and diesel cycles – construction and working of two stroke and four stroke engines – Heat balance test on I.C. engine – working principle of single and multistage compressors – Comparison of reciprocating and rotary compressors – classification of steam boilers – construction and working of steam turbines – working principle of steam power plant – Main elements of a nuclear power plant – Vapour compression cycle – factors affecting human comfort – working principle of a window air conditioner and central air conditioning system.

UNIT VII: COMPUTER APPLICATIONS:

Working principle and constructional details of computer – classification of computer – Input / Output devices – flow charting – MS Office & Star Office – creating documents – presentations – sending emails.

UNIT VIII: FLUID MECHANICS AND MACHINERY:

Working of differential manometer – use of venturimeter and orifice classification of mouth pieces meter – working of pelton wheel, francis turbine and kaplan turbine – construction and working principle of reciprocating pump, centrifugal pump and gear pump – quick return mechanism of shaping machine – table movement in a milling machine.

UNIT IX: COMPUTER INTEGRATED MANUFACTURING:

CAD – Definition – geometric modeling – wireframe, surface and solid modeling – graphicstandards – GKS, IGES, PHIGS and DXF. CAM – definition – group technology – part families – parts classification and coding – CAPP – types. CNC – definition – components of CNC –ATC – CNC EDM. Part program – format – coordinate system – types of motion control – typesof interpolation – G and M codes – sub program – canned cycles.

UNIT X: DESIGN OF MACHINE ELEMENTS:

Factors affecting selection of material – classification of bearings – sliding contact and rolling contact bearings – radial and thrust bearings – limits – fits – tolerance – classification of fits –cams and followers – types.

TNPSC CESSE Syllabus 2023 for PAPER-II:

Paper-II (Part-A)

பத்தாம் வகுப்புக்கான கட்டாயத் தமிழ் மொழித் தகுதித் தேர்வு
(தேர்வுக்கு உட்பட்டது)
பாடத்திட்டம்

• பிரித்தமடுதல் / தேற்றமடுதல்.
• எதிர்ப்பு டம்பர்.
• மபாருந்தாச் மோல்லைக்கண்டறிதல்.
• பிளாட்ரிடம் (i) எண்டிபிலாவை அகற்றுதல் (ii) லேபியா, மென்மையான குருத்தெலும்புகளை அகற்றுதல் / இரண்டாம் நிலை பிளேக் அகற்றுதல்.
• ஆங்கிக்மோலுக்கு தீராநத்மிச்மோல் தெரிந்து கொள்வது.
• ஒலிப்பு வார்த்தைகளுக்கும் தவறுகளுக்கும் உள்ள வேறுபாட்டை அறிதல்.
• ஒருமபாருள் தம்பிமார்கள்.
• ஒருமபாருள் சிறந்ததைத் தரும்
• தவர்ச்மொல்லை மகாடுத்து / வில்லன்மும்டு, வில்லன்மைச்செம், வில்லனையும்பையார், மதழிறம்பயலர / உருவாக்கம்.
• மோல்களின் அகரவரிசை ஏற்பாடு.
• பாலை முறைப்படுத்துதல் மற்றும் மென்மையாக்குதல்.
• இருசொற்களுக்கு இடையிலான வேறுபாட்டைக் கண்டறிதல்.
  (எ.கா.) பதுக்கல்
• இயலாமை தடுப்பு.
• எந்த வாக்கியத்தின் வடிவத்திலும் கண்மூடி – தன்விலான், பீர்விலானா, மேவிலானா,
  கவ்பாய்க்கு கண்ணை மூடிக்கொள்.
• உவல யாழ்விகப்பம்பரும் மபாருத்த அன்பருளைத் தர்மம் எழுதுதல்.
• அழற்சி மச்சம் (கலிச்மோல்)
• வெளிநாட்டு இடங்கள்.
• இலை தமிழ்ச்சிம்மொலக்கத்தை மற்ற அசிமுத்களுக்கு அடையாளம் காணுதல் (எ.கா.) தகல்துபிஸ்கட் – தங்கட்டி.
• நகரவாசிகளின் திசைகளை எழுதவும் (எ.கா.) தஞ்சாவூர் – தஞ்சாலே.
  20 நிறுத்தற்குறிகள்.
• எழுத, எழுத (வரன் – வரும்).
• புதிய மொல்லஸ்க் இலைகளின் உருவாக்கம்.
• மப்ருட் அனாசெம் அல தால் (இறந்த, நிகழ்காலம், எதிர்காலம்).
• ஆர்யன்வினச்மொலைத் ததர்ந்மத
• அரினெல்லபுச்மோல் (அனத்வா, யேமனில், கடவுளால், எனவே, அது தவறு).
• அலபாதிற்குள் பொருத்தமான இடத்தில் உள் மச்சத்தைத் தேர்ந்தெடுக்கவும்.
• இருமபாருள் தாருகா.
• குறில் – மதில் அதரம், மபாருள் தோல்வி.
• தாவா, கரீம் – பகுதி? இது தவறு?
• கலை அறிவு: – எ.கா. – செயற்கை நுண்ணறிவு சூப்பர் கணினி
• மாப்ருட்ட அன்பருளை மதறிவு சாரை
• புல் (போன்ற) புல் கலவைகள்
• வெளியேற்ற தடை
• நல்லிணக்கம் (ஒன்றுக்கு ஒன்று)
• டில் – மபாருள் – மபாருதுக
• ஒருளா -பண்ல பிலை
• பரியன விலடலய ததரன்மடு பகுதியின் வினாக்களுக்கு

SUBJECT CODE: 003

UNIT-I GENERAL SCIENCE:

Physics: Nature of Universe-General Scientific laws-Inventions and discoveries-National scientific laboratories-Mechanics and properties of matter-Physical quantities, standards and units-Force, motion and energy-Magnetism, electricity and electronics -Heat, light and sound.

Chemistry-Elements and Compounds-Acids, bases and salts-Fertilizers, pesticides, insecticides.

Botany-Main Concepts of life science-Classification of living organism-Nutrition and dietetics- Respiration.

Zoology-Blood and blood circulation-Reproductive system-Environment, ecology, health and hygiene-Human diseases including communicable and non – communicable diseases – prevention and remedies-Animals, plants and human life.

UNIT-II. CURRENT EVENTS

History-Latest diary of events-national – National symbols – Profile of States-Eminent persons & places in news-Sports & games-Books & authors – Awards & honors’-India and its neighbors

Political Science-1. Problems in conduct of public elections-2. Political parties and political system in India-3. Public awareness & General administration-4. Welfare oriented govt. schemes, their utility

Welfare Scheme of Government – Political parties and Political system in Tamil Nadu and India.

Geography–Geographical landmarks-

Economics– Current socio-economic problems

Science– Latest inventions in Science and Technology – Geographical Land Marks – Current Socio – Economic issues

UNIT- III. GEOGRAPHY

(i) Earth and Universe-Solar system-Monsoon, rainfall, weather & climate-Water resources — rivers  in India-Soil, minerals & natural resources-Forest & wildlife-Agricultural pattern

(ii) Transport including surface transport & communication-Social geography.

(iii) population-density and distribution in Tamil Nadu and India.

(iv) Calamities–Disaster Management–Environment – Climate change.

UNIT – IV. HISTORY AND CULTURE OF INDIA AND TAMIL NADU

Indus valley civilization-Guptas, Delhi Sultans, Mughals and Marathas-Age of Vijayanagaram and the bahmanis-South Indian history-Culture and Heritage of Tamil people-India since independence-Characteristics of Indian culture-Unity in diversity –race, colour, language, custom- India-as secular state-Growth of rationalist, Dravidian movement in TN-Political parties and  populist schemes.

UNIT-V. INDIAN POLITY

Constitution of India–Preamble to the constitution- Salient features of constitution- Union, state and territory- Citizenship-rights amend duties- Fundamental rights- Fundamental duties- Human rights charter- Union legislature – Parliament- State executive- State Legislature – assembly- Local government – panchayat raj – Tamil Nadu- Judiciary in India – Rule of law/Due process of law—

Elections- Official language and Schedule-VIII- Corruption in public life- Anti-corruption measures – CVC, Lok-adalats, Ombudsman, CAG – Right to information- Empowerment of women- Consumer protection forms.

UNIT-VI. INDIAN ECONOMY

Nature of Indian economy- Five-year plan models-an assessment-Land reforms & agriculture- Application of science in agriculture-Industrial growth-Rural welfare oriented programmers-Social sector problems – population, education, health, employment, poverty-Economic trends in Tamil Nadu

UNIT-VII. INDIAN NATIONAL MOVEMENT

National renaissance-Emergence of national leaders-Gandhi, Nehru, Tagore-Different modes of agitations-Role of Tamil Nadu in freedom struggle Rajaji, VOC, Periyar, Bharathiar & others.

UNIT-VIII. APTITUDE & MENTAL ABILITY TEST (SSLC STANDARD)

Conversion of information to data – Collection, compilation and presentation of data – Tables, graphs, diagrams – Analytical interpretation of data – Simplification-Percentage – Highest Common Factor (HCF) – Lowest Common Multiple (LCM) – Ratio and Proportion – Simple interest – Compound interest – Area – Volume -Time and Work – Logical Reasoning – Puzzles – Dice -Visual Reasoning – Alpha numeric Reasoning – Number Series.

Final Words :

All the Candidates are Advised to be in touch with the Official Website to got the Information Regarding TNPSC CESSE Syllabus 2023, Admit Card & Other Related Information. Also the Candidates Can Bookmark us (www.jobriya.com) by Pressing Ctrl+D.

Important Link Area for TNPSC CESSE Syllabus 2023 :

Detailed Syllabus PDF	Download Syllabus PDF
Admit Card	TNPSC CESSE Admit Card
Recruitment Details	TNPSC CESSE Recruitment
Official Website	https://www.tnpsc.gov.in/

!!..Wish You All The Best..!!

Candidates can leave your comments in the comment box. Any query & Comment will be highly welcomed. Our Panel will try to solve your query. Keep Updating Yourself.